A number of recent reports in the news media have put out warnings about this week’s early summer heatwave, some of which have even talked of “broadband blackouts“. But the reality is that this week’s heatwave is unlikely to cause any major problems for either consumers or ISPs, provided you’re sensible.
First things first, this week’s “heatwave” is relatively pedestrian and expected to peak in some areas at around 30c. On the one hand, that’s fairly hot for this part of the world, which means our office AC unit is likely to get a good workout. But on the other hand, it’s not a patch on the 40c+ heatwave that much of the country experienced in 2022 and is below the more typical and often location specific summer peaks of c.35-38c.
All electronic devices generally do emit some heat, even if you can’t always feel it, and the least efficient ones tend to produce more than most. Most router manufactures are aware of this and design their hardware to operate at temperatures of up to around 40c (this does vary a bit between manufacturers).
Sadly, an overheating broadband ISP router is something that can happen, although even many of the devices with a stated tolerance of up to 40c may actually continue to function for a handful of degrees past that point. But experiences do vary, and we should point out that your mobile phones, laptops, video game consoles, tablets and other sophisticated electronics may also run into their own issues.
However, a router that overheats, or which nears the point of overheating, will often do one of several things. The most likely outcome is that the device’s processor (CPU / APU) will throttle back and performance will be degraded, which could affect response times on the device’s User Interface (UI) and might also impact your LAN and WiFi speeds or connection stability. But this will also lower the heat output and protect the device.
Sometimes routers, just like other electronics, will get so hot that they restart themselves. But in most cases this is only temporary and the device will eventually return to normal, causing a short connection drop. Only very rarely does this result in complete hardware failure and, as we say, a 30c heatwave is generally well within the tolerance of most such networking kit.
Nevertheless, often all that’s needed to avoid any such issues is to use a bit of common sense, such as by NOT placing the device in locations where the temperatures can easily rise beyond the device’s rated maximum. In that sense, we’ll repeat the same tips we’ve given in the past.
ISPreview’s Top Tips for Keeping Broadband Routers Cool
1. Never place it in direct sunlight, obviously.
2. Never allow your pet to use the router as its own personal sleeping mat. Yes, it might seem cute, but the slim risk of this causing an electrical fault, fire or overheating is something best avoided. Just remember, cats can be jerks, so they won’t obey your orders and even placing said device within a ring of defensive orange peel may not be enough to stop their unwanted advances toward your personal centre of internet excellence.
3. Place the router on a hard and flat surface (ideally something cool), which should allow the air to move freely around it (especially below the device). Wall mounting the device can also help (vertically), provided the wall itself isn’t transmitting a lot of heat (e.g. south facing walls with no cavity insultation will get warmer). In other words, never put your router on a surface that doesn’t allow heat to escape (e.g. on a leather sofa).
4. Some older / cheaper routers and chipsets are more susceptible to heat problems, especially if they’ve had a lot of usage, and at the extreme you might need to consider buying a newer device. Mind you, having an ultra powerful device can sometimes be similarly problematic. Granted, this is a pretty rubbish “tip“, so let’s move on.
5. Consider buying a cheap laptop size cooling mat / pad for the router. Kit like this can be had for around £15-£30 (examples) and often includes a small internal USB fan, which is handy because some routers include low-power USB ports that can be used to run the fan(s). Alternatively, any old cheap fan pointed at the router will do, but this probably isn’t really necessary for a 30c heatwave.
6. If the heat is truly horrific in your home (i.e. 40c+), then it may be wise to switch the router off when not in use. In fact, get out of the house yourself and find shade. But don’t restart it too often if you’re on an older DSL (ADSL, FTTC etc.) based connection, as they don’t respond well to being repeatedly switched on and off during the day (can result in a loss of speed). But in our experience, there’s usually not much harm in turning it off once in the day for a period, although this really is a last resort.
7. Disable non-critical router services when not needed. The less the router has to do, the less heat it will produce and the faster it can operate. Some routers allow you to disable specific services (e.g. wifi, connection logs etc.) and, during hot weather, this can help to keep the device running smoothly. On the other hand, it’s probably best not to fiddle with these things unless you know what you’re doing.
8. Situate the router in the coolest room possible, which is often the lowest point in your home with the thickest walls. Unfortunately this might constrain the performance of your wireless network, thus there’s a careful balancing act to consider.
9. Buy Air Conditioning for your home, provided you can afford the energy bills or have a solar/battery system to off-set the usage.
Hopefully it goes without saying that pouring ice or ice water over your router, or even putting it in the fridge, are both things that should be avoided. If anybody else has some useful tips, then please feel free to add them into the comments below.